DCC Decoders

21 Pin DCC Loco-Decoder (with Brake Button function) A 21 Pin (21MTC) DCC Decoder suitable for models fitted with a 21 Pin DCC decoder socket (do not use with the Bachmann Branchline Class 90 – use 36-569A with these models). Highlights include: Dual-mode DCC/DC decoder with Back EMF function 10 powered function outputs (+8 logic level outputs and 2 logic level/SUSI outputs) 1.5A continuous load R…

36-556RA E-Z Command 90 Useful for smaller OO gauge or N gauge engines with restricted space with the locomotive itself.

36-566 0.9 Amp 4 Function 8 Pin DCC Decoder featuring RailComPlus

Bachmann 36-568A 6 Pin Decoder with Back EMF Brake Button ft Railcom

Bachmann Next18 DCC Loco-Decoder (with Brake Button function) Highlights include: Multi-mode (NMRA-DCC format, Motorola protocol, DC Analogue and AC Analogue) with Back EMF function 4 powered function outputs (+2 logic level and 2 logic level/SUSI/Servo outputs) 0.7A continuous load Suitable for models equipped with DC motors (including coreless motors) Brake Button function for realistic control…

DCC21 Small Decode with NEM 8 pin plug N / HO / OO Scales Most suited to OO/HO and all N Gauge locomotives. Key features of this standard decoder include smooth operation, 14/28 speed steps, plug and play, transponder id-equipped, all mode programming, decoder reset CV, motor isolation protection, advanced consisting, 2 and 4 digit addressing and DCC compatability. this decoder is rated at 1 amp (…

Gaugemaster DCC30 DCC Accessory Decoder for four accessories N / HO / OO Scales This 3 amp stationary decoder has four separately addressed outputs which can be used individually or set up as a route. This decoder is used for the operation of solenoid point motors or accessories such as lighting or signals.

DCC40 Auto Reverse Module N / HO / OO Scales automatically switches polarity in a reverse-loop situation - completely hands free!

DCC92 Ruby Decoder 2 Function Small 8 pin Description The DCC92 is a 8 pin decoder with a fitted 45mm harness between the pins and the decoder. An ideal decoder for retrofitting into non DCC Ready locomotives. Features 2 Digit and 4 Digit Addressing 14, 28 or 128 Speed Steps Smooth Operation Constant Brightness Lighting Direct Mode Programming Motor Isolation Protection Advanced Consisting

DCC99 Scale: Multi Scale Ruby Series PowerPal for use with DCC90/91/94/95 Details The DCC99 is the PowerPal and is designed to keep your locomotives running through dirty or dead track sections. Once a bad bit of track is detected the capacitors kick in and keep the motion, lights and sounds alive until power is restored. The time period can change depending on the decoder that the PowerPal is fit…

R7274 4 Pin Decoder Description The 4-pin decoder, previously only available as a spare (X9659), is compatible with the 0-4-0 W4 Peckett from the 2020 range.

R8115 TTS Sound Decoder: Merchant Navy Description IMPORTANT - The decoder does not support sound under DC (analogue) operation. Sounds can only be played under DCC (digital) operation. This applies to all sounds, both running and spot sounds. The locomotive's motor may be controlled under DC operation. Function list F0 Headlight/rearlight F1 Steam/ Steam exhaust F2 Whistle long F3 Whistle medium…

R8245 Hornby Sapphire Locomotive Decoder Supports 1 Amp continuous current with 1.5 Amp stall. Low speed "gear" for shunting operations. Set amounts of "water" and "fuel" can be stored in the Sapphire providing real time fuel consumption. Burn rates can be selected. All CVs can be changed. The Sapphire Decoder is NMRA compliant, and supports RailCom and asymmetric DCC. High Frequency back-emf moto…

R8249 Hornby 8 Pin 4 Function Locomotive Decoder (v1.3 NMRA Compliant) The Hornby locomotive decoders may be used with all standard digital control equipment that conforms to the NMRA standards. Control of the motor's rotational speed (load compensation) Acceleration and deceleration separately adjustable Selectable for operation with 14, 28, 128 speed steps Programming on main track Four On/Off f…