Single Track Panel Mounted Controller with Feedback* for most small Gauges
Input:
1 x 16v A.C. at 1.25 amps (Gaugemaster T1 or M1 recommended)
Output:
1 x 12v D.C. at 1 amp controlled
Measurements:
Panel: 65mm x 90mm x 15mm deep
Aperture: 45mm x 70mm x 15mm deep
*Not recommended for use with coreless design motor. May not be suitable for use with some DCC ready locomotives

FEEDBACK: Feedback controllers create a closed loop between the controller and the locomotive which senses the load in the circuit and constantly adjusts the output. This will maintain the locomotive at an even speed up and down gradients and around curves without altering the regulator of the controller. Feedback controllers are not suitable for Portescap or other coreless motors or for poor quality mechanisms particularly in 'N' and other small gauges.