Single Track Walkabout Controller with Simulation for N, OO and most small Gauges
Input:
1 x 16v A.C. at 1.25 amps (Gaugemaster T1, M1 or 100M recommended, requires a GM75 6 Pin DIN Plug to connect to 100M, sold seperately)
Output:
1 x 12v D.C. at 1 amp controlled
Fitted with 1.5 metres of 4 core cable
Measurements:
109mm x 59mm x 20mm deep
Unit is similar to Model W but has simulation which is operated by a wheel control on the side of the unit. The simulation can be switched on or off as required. Speed is controlled by the control knob and the direction changes by 3 position centre off switch.

SIMULATOR / SIMULATION: This is sometimes called 'inertia' or 'momentum'. It allows controllers so fitted to automatically accelerate a train, allow it to coast or be braked to a standstill. This is achieved by two controls, a regulator and a brake and gives more realistic acceleration and braking. In Gaugemaster controllers it can be switched off to allow the controller to be operated with standard control.