Skip to content
2mm (1/8 2mm (1/8") Heat Shrink Tubing 150mm (2 Red, 2 Black)
£1.99
In stock
3.2mm (1/8") Heatshrink Tube 2 ea. Red & Black 150mm Long
5mm (3/8 5mm (3/8") Heat Shrink Tube 150mm (2 Red, 2 Black)
£2.25
In stock
9.5mm (3/8") Heatshrink Tube 2 ea. Red & Black 125mm Long
1 x AA Battery Holder 1.5v 1 x AA Battery Holder 1.5v
£0.60
In stock
E134 Battery Holder To take one penlight (AA) battery. 1.5 volt. Snap terminals. Dimensions: 57 x 13 x 17mm.
3 x AA Battery Holder 4.5v 3 x AA Battery Holder 4.5v
£1.00
In stock
E143 4.5v Battery Holder To take three penlight (AA) batteries. 4.5 Volt. Snap Terminals. Dimensions: 57 x 49 x 17mm.
4 x AA Battery Holder 6.0v 4 x AA Battery Holder 6.0v
£1.50
In stock
E135 Battery Holder 6v To take four penlight (AA) batteries. 6 Volt. Snap Terminals. Dimensions: 57 x 29 x 26mm.
Absima CB-1S Mains LiPo//LiFe/NiMH Charger Absima CB-1S Mains LiPo//LiFe/NiMH Charger
£24.99
In stock
Absima CB-1S Mains Charger Perfect charger for beginners - easy to use enough power for a short charging time for a fantastic price! Suitable for LiPos and NiMH batteries. Features: Charging current: 1.0A / 2.0A / 3.0A Input voltage: 110 - 240V LiPo/LiFe: 1 - 3 cells (3.7-11.1V) through balancer port NiMH: 1 - 6 cells (1.2-7.2V) through charging jack Charging power: 50W Balancer port fix on chargi…
Deans Style Green Plug (1pr) Deans Style Green Plug (1pr)
£3.25
In stock
TB2011G Deans Style Green Ultra Plug (1 pair)
Deans Style Yellow Plug (1pr) Deans Style Yellow Plug (1pr)
£3.25
In stock
TB2011Y Deans Style Yellow Ultra Plug (1 pair)
Dynamite Passport Ultraforce High Charger Dynamite Passport Ultraforce High Charger
£99.99
In stock
DYN4105UK Passport Ultraforce 200W High AC/DC Output Advanced Charger by Dynamite Key Features 200W charge power provides enough output power for high capacity batteries with 1-3C charge rates Adjustable charge current range of 0.1 to 10.0A Charges LiPo/Life (1-6Cells), NiCD/NiMH (1-18 cells) and Pb/SLA type batteries (2-24V) Adjustable discharge current range of 0.1 to 5.0A Comes with Tamiya, Dea…
ET0241 Etronix Powerpal HP/PQ Balance Adaptor Boaed ET0241 Etronix Powerpal HP/PQ Balance Adaptor Boaed
£2.99
In stock
Etronix ET0241 POWERPAL HP/PQ BALANCE ADAPTOR BOARD
ET0818 Tamiya Charger End to Female Deans ET0818 Tamiya Charger End to Female Deans
£2.75
In stock
ET0818 Etronix Male Tamiya to Female Deans Adaptor
Etronix 100A Watt Meter, Battery Checker, Balancer & Temp Probe Etronix 100A Watt Meter, Battery Checker, Balancer & Temp Probe
£29.99
In stock
ET0507 ETRONIX POWER ANALYZER 2.0 MULTIFUNCTION METER The Power Analyzer 2 is supplied with pre-tinned wires, so simply fit the connectors of your choice prior to use. A simple, cost-effective tool that allows accurate and repeatable measurements of: Current draw (A) Power (W) Battery voltage – both individual cell and overall pack (V) Energy Consumption (Wh) Temperature (°C) In addition the Power…
Etronix 150A Watt Meter & Power Analyser Etronix 150A Watt Meter & Power Analyser
£24.99
In stock
Etronix ET0506 Heavy Duty 150A Watt Meter and Analyser Features: Helps to prevent peak currents damaging battery, electronic speed controllers, motors, wiring and connectors, Verify sufficient operating voltage under load Set cut off voltages, check battery capacity and health Confirm proper battery charger operation Measure receiver and servo current to determine if a UBEC is needed
Etronix Power Analyzer Watt Meter & Battery Checker/Balancer Etronix Power Analyzer Watt Meter & Battery Checker/Balancer
£24.99
In stock
ET0505 Etronix Power Analyzer Watt Meter-Battery Checker-Balancer The must have companion for any serious electric flight enthusiast, the Power Analyzer features three must have functions for electric model set-up. Etronix Power Analyzer Features: Watt Meter - measure electric current consumption up to 100A Battery Check - displays voltage and capacity of your lipo battery and individual cell volt…
Etronix Powerpal 2S/3S Lipo/Life Charger Etronix Powerpal 2S/3S Lipo/Life Charger
£11.99
In stock
ET0223 Etronix Powerpal Pocket 2 Lipo Life Balance Charger This simple to use charger is the perfect replacement for stock supplied balance chargers in RTF/RTR aircraft, helis and cars. The Etronix Powerpal Pocket 2 charges 2S and 3S LiPo and LiFe batteries at a fixed 800Mah charge rate and can accept the popular XH balance plugs. Available in UK or European format. Powerpal Pocket 2 Features: Pow…
Female (Charger End) JST Connector with 100mm 20awg wire Female (Charger End) JST Connector with 100mm 20awg wire
£1.25
In stock
ET0625 Female JST Connector with 10 cm 20AWG Silicone Wire
Fusion 12v SLA Battery Charger by Logic RC Fusion 12v SLA Battery Charger by Logic RC
£10.99
In stock
Fusion Boot SLA12 12v Sealed Lead Acid Charger by Logic AC Input 110-240V Charge rate 700mA SLA Viltage 12V
Fusion LX41B Ethos Pro Charge/Bal Fusion LX41B Ethos Pro Charge/Bal
£49.99
In stock
Fusion Ethos LX41B Pro Programmable Charger and Balancer Features: Built-in intelligent balancing circuit is designed to individually balance each cell on a lithium battery pack within the tolerance of 5mV during charge. Balancing plug adaptor boards are supplied to suit FlightPower, Thunder Power and JST-XH batteries. Optional adaptors for Polyquest & 4/2mm plug car packs are available. 2 line, 8…
Fusion NX84 Sprint 4-8 Cell Delta Peak Mains Charger Fusion NX84 Sprint 4-8 Cell Delta Peak Mains Charger
£11.50
In stock
O-FS-NX84 Fusion NX84 Sprint AC 1 amp Delta-peak charger 4 - 8 cells
Gold Connectors 2.0mm EC2 (2prs) Gold Connectors 2.0mm EC2 (2prs)
£2.99
In stock
EFLAEC203 EC2 Device & Battery Connector male/female
JP 6v SLA Battery Charger JP 6v SLA Battery Charger
£14.99
In stock
JP 6v SLA Battery Charger Product Description Automatic mains (240v) charger for sealed lead acid batteries featuring protection against short circuit and incorrect polarity connection. Suitable for sealed lead acid batteries of 6V (3 cell) of capacity 2Ah to 10Ah.
JP NIMH 230v Delta-Peak Charger JP NIMH 230v Delta-Peak Charger
£10.69
In stock
NiMH 130v AC 6-7 Cell Delta Peak Charger by J Perkins 5510530 NiMH Charge 230v Charges 6-7 cell NiMH batteries from a 230 volt AC mains supply Automatic Delta Peak charge and cut off 1.2 amp charge rate LED charge indicator Short circuit protection Tamiya connector charge lead This handy mains charger will fast charge 6-7 cell Nimh batteries (7.2-8.4v) It has an output of 1.2 amps and can charge a…
Press On Terminal (9v) Press On Terminal (9v)
£0.80
In stock
E145 Press On Terminal for battery holder Size: 5mm with 140mm wires.
Pro-Peak AC/DC Delta 3 (2,3.5,5A)Charger Pro-Peak AC/DC Delta 3 (2,3.5,5A)Charger
£25.75
In stock
Ripmax Pro-Peak AC/DC Delta Peak Charger The new Delta 3 is designed for charging 4 to 8 cell Ni-Cd and Ni-MH packs. It has a 240v AC mains and 12v DC input and has a three high output currents - 2, 3.5 and 5 Amps. An internal fan keeps it cool during the charge period. • 240v Mains AC & 12v DC input • Switchable 2/3.5/5A charge rates • Fast or trickle charge 4-8 Ni-Cd or Ni-MH packs • Delta Peak…

Hello,

We are very sorry, but the browser you are visting us with is outdated and not complient with our website security.

Please upgrade your browser to a modern secure version to view our website.