Battery Chargers

Absima CB-1S Mains Charger Perfect charger for beginners - easy to use enough power for a short charging time for a fantastic price! Suitable for LiPos and NiMH batteries. Features: Charging current: 1.0A / 2.0A / 3.0A Input voltage: 110 - 240V LiPo/LiFe: 1 - 3 cells (3.7-11.1V) through balancer port NiMH: 1 - 6 cells (1.2-7.2V) through charging jack Charging power: 50W Balancer port fix on chargi…

DYN4105UK Passport Ultraforce 200W High AC/DC Output Advanced Charger by Dynamite Key Features 200W charge power provides enough output power for high capacity batteries with 1-3C charge rates Adjustable charge current range of 0.1 to 10.0A Charges LiPo/Life (1-6Cells), NiCD/NiMH (1-18 cells) and Pb/SLA type batteries (2-24V) Adjustable discharge current range of 0.1 to 5.0A Comes with Tamiya, Dea…

Etronix ET0241 POWERPAL HP/PQ BALANCE ADAPTOR BOARD

ET0507 ETRONIX POWER ANALYZER 2.0 MULTIFUNCTION METER The Power Analyzer 2 is supplied with pre-tinned wires, so simply fit the connectors of your choice prior to use. A simple, cost-effective tool that allows accurate and repeatable measurements of: Current draw (A) Power (W) Battery voltage – both individual cell and overall pack (V) Energy Consumption (Wh) Temperature (°C) In addition the Power…

Etronix ET0506 Heavy Duty 150A Watt Meter and Analyser Features: Helps to prevent peak currents damaging battery, electronic speed controllers, motors, wiring and connectors, Verify sufficient operating voltage under load Set cut off voltages, check battery capacity and health Confirm proper battery charger operation Measure receiver and servo current to determine if a UBEC is needed

ET0505 Etronix Power Analyzer Watt Meter-Battery Checker-Balancer The must have companion for any serious electric flight enthusiast, the Power Analyzer features three must have functions for electric model set-up. Etronix Power Analyzer Features: Watt Meter - measure electric current consumption up to 100A Battery Check - displays voltage and capacity of your lipo battery and individual cell volt…

ET0223 Etronix Powerpal Pocket 2 Lipo Life Balance Charger This simple to use charger is the perfect replacement for stock supplied balance chargers in RTF/RTR aircraft, helis and cars. The Etronix Powerpal Pocket 2 charges 2S and 3S LiPo and LiFe batteries at a fixed 800Mah charge rate and can accept the popular XH balance plugs. Available in UK or European format. Powerpal Pocket 2 Features: Pow…

Fusion Boot SLA12 12v Sealed Lead Acid Charger by Logic AC Input 110-240V Charge rate 700mA SLA Viltage 12V

Fusion Ethos LX41B Pro Programmable Charger and Balancer Features: Built-in intelligent balancing circuit is designed to individually balance each cell on a lithium battery pack within the tolerance of 5mV during charge. Balancing plug adaptor boards are supplied to suit FlightPower, Thunder Power and JST-XH batteries. Optional adaptors for Polyquest & 4/2mm plug car packs are available. 2 line, 8…

O-FS-NX84 Fusion NX84 Sprint AC 1 amp Delta-peak charger 4 - 8 cells

JP 6v SLA Battery Charger Product Description Automatic mains (240v) charger for sealed lead acid batteries featuring protection against short circuit and incorrect polarity connection. Suitable for sealed lead acid batteries of 6V (3 cell) of capacity 2Ah to 10Ah.

NiMH 130v AC 6-7 Cell Delta Peak Charger by J Perkins 5510530 NiMH Charge 230v Charges 6-7 cell NiMH batteries from a 230 volt AC mains supply Automatic Delta Peak charge and cut off 1.2 amp charge rate LED charge indicator Short circuit protection Tamiya connector charge lead This handy mains charger will fast charge 6-7 cell Nimh batteries (7.2-8.4v) It has an output of 1.2 amps and can charge a…

Ripmax Pro-Peak AC/DC Delta Peak Charger The new Delta 3 is designed for charging 4 to 8 cell Ni-Cd and Ni-MH packs. It has a 240v AC mains and 12v DC input and has a three high output currents - 2, 3.5 and 5 Amps. An internal fan keeps it cool during the charge period. • 240v Mains AC & 12v DC input • Switchable 2/3.5/5A charge rates • Fast or trickle charge 4-8 Ni-Cd or Ni-MH packs • Delta Peak…

PX1886 - PROLUX AC/DC 4-7 CELL 2AMP PEAK CHARGER Switching transfer (low heat dissipation) • Selectable Charge rate: AC 4-8 Cell: 1, 2 Amp • DC 4-7 Cell: 1, 2, 4 Amp • For charging 4-7 cell Ni-Cd and Ni-MH batteries • 8 bit microchip CPU controller • OUTPUT has short circuit protection circuitry • With LED light and beeper to indicate the charging status • Re-peak function

Prolux 3505 DC 3 in 1 Field Peak Charger Features: 1. 3 outputs can be utilized at the same time; the total maximum current is 6 Amps 2. 12 bits CPU controller 3. Voltage Booster system can charge 1-8 cell Ni-Cd & Ni-MH battery packs 4. Volume control 5. TX(6-8 Cells) charge current 1; 2; 4 Amps RX(4-5 Cells) charge current 1 or 2 Amps Glow Starter charge current only 2 Amps 6. LED & beeper indica…

Mains Charger - 12v SLA Battery 12v 500mAh charger for 12v Sealed Lead Acid Batteries