Plastic Kits

Ratio126 GWR PLATE BOGIES SPOKED (PAIR) DESCRIPTION Pack includes parts to make a pair of these heavy duty design bogies that feature cast steel type sideframes. Kit includes bolster, wheels and tension lock couplings; supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Recommended to be used with: OO/HO kit building and sc…

Ratio 143 Hand Rail Stanchions (Single Rail) OO/HO Scale plastic kit - requires assembly

Ratio 411 - OO/HO Loading Gauge Ratio Lineside Kits OO/HO GWR/LMS Joint Loading Gauge After loading, open wagons were checked for height using this simple gauge to ensure that loads did not hit bridges etc. and therefore were usually placed near the yard exit. Supplied with  pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Ratio 00 ra…

Ratio 412 OO/HO SR Loading Gauge Ratio Lineside Kits OO/HO SR Loading Gauge After loading, open wagons were checked for height using this simple gauge to ensure  that loads did not hit bridges etc. and therefore were usually placed near the yard exit. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Ratio 00 range of Bui…

Ratio 413 WATER CRANE & FIRE DEVIL KIT Stations often had these Water Cranes at the end of the platforms so the locomotives could be refilled without detaching them from the train. Also included is a coke brazier, called a 'fire devil' to keep the cast iron pipe from freezing up during the winter. These cranes were usually supplied by a large water tank (see Ratio 506 and 551 and Wills SS34 kits).…

Ratio 423 GWR Wire Lineside Fencing OO/HO gauge plastic kit - assembly required Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains 36 posts and enough wire to make 720mm of fencing.

Ratio 430 GWR Station Fencing Gates & Ramps   (green)  OO/HO Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains: ‚Ģ 340mm of Straight Fencing ‚Ģ 2 x 102mm lengths of Ramp Fencing ‚Ģ 1 Large and 1 Small Gate ‚Ģ 2 Ramp Gates ‚Ģ 1 Ticket Gate Technical Specification: Length: 680 103mm Ratio 431 Green Statio…

Ratio 434 GWR Spear Fencing, 700mm Scale / Type: OO Scale

Ratio 435 GWR Spear Fencing, Black Ramps & Gates HO/OO Gauge Classic style fencing modelled on a GWR design, but still seen also in many other places, around parks, public buildings, monuments etc. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Includes 2 x 100mm ramps plus 2 small, 2 large and 2 double gates

Ratio 455 Modern Station/Street Lighting OO/HO scale plastic model kit - requires assembly

Ratio 460 GWR Square Post Home Signal Kit OO/HO gauge Lower Quadrant Signals are an essential part of the railway and the model should not be any different. These signals are supplied as unpainted kits so will need both gluing and painting to complete.

Ratio 461 GWR Signal Square Post Signal (Distant) Kit OO/HO Gauge Signals are an essential part of the railway and the model should not be any different. These signals are supplied as unpainted kits so will need both gluing and painting to complete.

Ratio 465 Ground Signals Plastic Kit OO/HO gauge Pack of 4 Please note that this item is a unpainted kit and will need assembling and painting

Ratio 503 Platfrm/Ground Level Signal Box

Ratio 506 Square Water Tower

Ratio 511 Lineside Huts used for storage

Ratio 512 Skylights (2) OO/HO Gauge plastic kit-requires assembly Pack of 2 which can also be used as cold frames. Approximately 32mm long and 22mm wide each. Glue and paints required to complete model. Technical Specification: Length: 32mm Width: 22mm Recommended to be used with: OO/HO kit building and scratchbuilding projects

Ratio 517 SR Concrete Footbridge OO/HO A Southern Railway design that will span 2 tracks and includes lamps and smoke deflectors. Glue and paints required to complete model. Span 150mm. Length: 150mm

Ratio 519 Large Grounded Coach  Kit Footprint 20mm x 15 mm Also includes clutter and fencing

Ratio 521 Industrial Red Brick Window Arches OO/HO Scale Plastic Kit - assembly required

Ratio 531 Yard Crane OO/HO Used for loading goods onto wagons, these cranes were to be found by bay platforms in small stations with no goods sheds or in the yard of larger stations. The kit includes fine chain for the operating drive wheels and cord for the jib. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Ratio 544 Carriage Cleaning Platform OO/HO Gauge Plastic Kit Assembly Required as still in use today Length 500mm.

Ratio 546A Rolling Underframe for RO546 Kit Locomotive lifting hoist, or RO546 Traversing Crane, enabling them to run on tracks. Size 61mm

Ratio 550 Water Trough (length 30") and associated features OO/HO Gauge plastic kit - assembly required