Controllers/Electrics
£39.95
In stock
21 Pin DCC Loco-Decoder (with Brake Button function) A 21 Pin (21MTC) DCC Decoder suitable for models fitted with a 21 Pin DCC decoder socket (do not use with the Bachmann Branchline Class 90 – use 36-569A with these models). Highlights include: Dual-mode DCC/DC decoder with Back EMF function 10 powered function outputs (+8 logic level outputs and 2 logic level/SUSI outputs) 1.5A continuous load R…
£10.95
In stock
Bachmann 36-058 21 Pin Decoder Blanking plate Pack of 10
£17.95
In stock
36-556RA E-Z Command 90 Useful for smaller OO gauge or N gauge engines with restricted space with the locomotive itself.
£15.95
In stock
36-562 6 Pin Decoder Socket With Wiring Harness (x3)
£8.95
In stock
Bachmann 36-564 8 Pin Decoder Socket with Harness Suitable for N, OO, HO and O scales
£27.95
In stock
36-566 0.9 Amp 4 Function 8 Pin DCC Decoder featuring RailComPlus
£32.95
In stock
Bachmann 36-568A 6 Pin Decoder with Back EMF Brake Button ft Railcom
£46.95
In stock
Bachmann Next18 DCC Loco-Decoder (with Brake Button function) Highlights include: Multi-mode (NMRA-DCC format, Motorola protocol, DC Analogue and AC Analogue) with Back EMF function 4 powered function outputs (+2 logic level and 2 logic level/SUSI/Servo outputs) 0.7A continuous load Suitable for models equipped with DC motors (including coreless motors) Brake Button function for realistic control…
£3.35
In stock
Train Tech BAT1 Batteries - CR2032 (3) for AL/CL/SFX Items Train Tech Part Number: BAT1 Scale / Type: HO / OO Scales Our Code: TTBAT1
£2.99
In stock
16/0.2 DropperWire 3A 5m- Red Suitible for use as dropper wires to a power bus for Model Railways.
£17.75
In stock
CDU Capacitor Discharge Unit by Gaugemaster For operating heavy duty point motors. The unit stores up power in capacitors and when a point motor is actuated, discharges in one big punch giving the point motor a firm and positive switching action. Connected to points via switches or probe and studs. Prevents burnt out motors. Input: 16v to 24v A.C. at a maximum of 2.5 amps Gaugemaster T1 for Hornby…
£28.95
In stock
DCC21 Small Decode with NEM 8 pin plug N / HO / OO Scales Most suited to OO/HO and all N Gauge locomotives. Key features of this standard decoder include smooth operation, 14/28 speed steps, plug and play, transponder id-equipped, all mode programming, decoder reset CV, motor isolation protection, advanced consisting, 2 and 4 digit addressing and DCC compatability. this decoder is rated at 1 amp (…
£64.95
In stock
Gaugemaster DCC30 DCC Accessory Decoder for four accessories N / HO / OO Scales This 3 amp stationary decoder has four separately addressed outputs which can be used individually or set up as a route. This decoder is used for the operation of solenoid point motors or accessories such as lighting or signals.
£50.00
In stock
DCC40 Auto Reverse Module N / HO / OO Scales automatically switches polarity in a reverse-loop situation - completely hands free!
£13.25
In stock
Gaugemaster DCC71 Prodigy DC Adaptor Plate / Decoder Tester N / HO / OO Scales This is an incredibly useful product that offers the modeller a decoder testing facility in a non railway environment which can be vital before a complex installation. The bulb (included) acts as the motor in such a test. It also offers outputs to run a locomotive on DC as well as the facility to switch instantly betwee…
£8.75
In stock
Gaugemaster DCC80 DCC Autofrog The DCC80 Autofrog is a simple switch that automatically changes the frog polarity on your DCC layout. In most situations, the use of electrofrog points is recommended on digital layouts to ensure reliability but this can make extra switching more complicated than it needs to be. Allow us to introduce you to the Autofrog. Wiring the DCC80 is simple. There are three s…
£25.00
In stock
DCC92 Ruby Decoder 2 Function Small 8 pin Description The DCC92 is a 8 pin decoder with a fitted 45mm harness between the pins and the decoder. An ideal decoder for retrofitting into non DCC Ready locomotives. Features 2 Digit and 4 Digit Addressing 14, 28 or 128 Speed Steps Smooth Operation Constant Brightness Lighting Direct Mode Programming Motor Isolation Protection Advanced Consisting
£26.50
In stock
DCC99 Scale: Multi Scale Ruby Series PowerPal for use with DCC90/91/94/95 Details The DCC99 is the PowerPal and is designed to keep your locomotives running through dirty or dead track sections. Once a bad bit of track is detected the capacitors kick in and keep the motion, lights and sounds alive until power is restored. The time period can change depending on the decoder that the PowerPal is fit…
£3.95
In stock
Gaugemaster GM14 Hornby Type Crimped Pin Terminals (6) Z / N / TT / HO / OO / O / Gauge 1 / G / Slot Cars Gaugemaster's range of electrical ''''bits and bobs'''' are invaluable to railway modellers, all with useful applications in the hobby.
£2.95
In stock
Gaugemaster GM15 Ring Terminals (6) Z / N / TT / HO / OO / O / Gauge 1 / G / Slot Cars Gaugemaster's range of electrical ''''bits and bobs'''' are invaluable to railway modellers, all with useful applications in the hobby.
£6.25
In stock
GM40 AC to DC Rectifier 1.5 amp Z / N / TT / HO / OO / O / Gauge 1 / G / Slot Cars A low cost 1.5 Amp rectifier for converting up to 16vAC into DC for use with led’s and motors etc, standard screw terminals so no special tool or connectors required.
£6.50
In stock
GM45 OO/ HO. ReRailer (plastic) The easiest way to get locomotives and rolling stock from their boxes and on to the railway.