Skip to content
Bachman 36-556RA E-Z Command 90 Bachman 36-556RA E-Z Command 90
£17.95
In stock
36-556RA E-Z Command 90 Useful for smaller OO gauge or N gauge engines with restricted space with the locomotive itself.
Bachman 36-557 E-Z Command 1 Amp 4 Function Decoder Bachman 36-557 E-Z Command 1 Amp 4 Function Decoder
£27.95
In stock
36-557 E-Z Command 1 Amp 4 Function Decoder A 21 Pin (21MTC) DCC Decoder suitable for models fitted with a 21 Pin DCC decoder socket (do not use with the Bachmann Branchline Class 90 – use 36-569 with these models). Highlights include: Dual-mode DCC/DC decoder with Back EMF function 4 powered function outputs (+2 logic level outputs) 0.9A continuous load RailComPlus® for automatic registration on…
Bachman 36-566 0.9 Amp 4 Function 8 Pin DCC Decoder featuring RailComPlus Bachman 36-566 0.9 Amp 4 Function 8 Pin DCC Decoder featuring RailComPlus
£27.95
£18.95
In stock
36-566 0.9 Amp 4 Function 8 Pin DCC Decoder featuring RailComPlus
Bachman 36-568A NEM 651 6 pin Loco-Decoder w/back EMF Bachman 36-568A NEM 651 6 pin Loco-Decoder w/back EMF
£32.95
In stock
Bachmann 36-568A 6 Pin Decoder with Back EMF Brake Button ft Railcom
Gaugemaster DCC21 Small Decoder Gaugemaster DCC21 Small Decoder
£28.95
In stock
DCC21 Small Decode with NEM 8 pin plug N / HO / OO Scales Most suited to OO/HO and all N Gauge locomotives. Key features of this standard decoder include smooth operation, 14/28 speed steps, plug and play, transponder id-equipped, all mode programming, decoder reset CV, motor isolation protection, advanced consisting, 2 and 4 digit addressing and DCC compatability. this decoder is rated at 1 amp (…
Gaugemaster DCC29 OMNI Direct Plug Decoder Gaugemaster DCC29 OMNI Direct Plug Decoder
£21.95
In stock
Gaugemaster DCC29 OMNI Direct Plug Decoder Dimensions: Length: 15mm Width: 12mm Depth: 10mm Specifications: Number of Functions: 4 Number of Pins: 8 Current Rating: 1 amp / 1.5 amp peak Address Range: 1 to 9999 Reset Value: CV8 to 8
Gaugemaster DCC30 Accessory Decoder Gaugemaster DCC30 Accessory Decoder
£64.95
In stock
Gaugemaster DCC30 DCC Accessory Decoder for four accessories N / HO / OO Scales This 3 amp stationary decoder has four separately addressed outputs which can be used individually or set up as a route. This decoder is used for the operation of solenoid point motors or accessories such as lighting or signals.
Gaugemaster DCC40 Auto Reverse Module Gaugemaster DCC40 Auto Reverse Module
£50.00
In stock
DCC40 Auto Reverse Module N / HO / OO Scales automatically switches polarity in a reverse-loop situation - completely hands free!
Gaugemaster DCC92 Ruby Decoder 2 Function Small 8 pin Gaugemaster DCC92 Ruby Decoder 2 Function Small 8 pin
£23.75
In stock
DCC92 Ruby Decoder 2 Function Small 8 pin Description The DCC92 is a 8 pin decoder with a fitted 45mm harness between the pins and the decoder. An ideal decoder for retrofitting into non DCC Ready locomotives. Features 2 Digit and 4 Digit Addressing 14, 28 or 128 Speed Steps Smooth Operation Constant Brightness Lighting Direct Mode Programming Motor Isolation Protection Advanced Consisting
Gaugemaster DCC99 Ruby Decoders Gaugemaster DCC99 Ruby Decoders
£25.50
In stock
DCC99 Scale: Multi Scale Ruby Series PowerPal for use with DCC90/91/94/95 Details The DCC99 is the PowerPal and is designed to keep your locomotives running through dirty or dead track sections. Once a bad bit of track is detected the capacitors kick in and keep the motion, lights and sounds alive until power is restored. The time period can change depending on the decoder that the PowerPal is fit…
Hornby R7239 TTS Sound Decoder - J36 Class Hornby R7239 TTS Sound Decoder - J36 Class
£50.99
In stock
Hornby TTS Sound Decoder - J36 Class
Hornby R7274 4 Pin Decoder Hornby R7274 4 Pin Decoder
£20.49
In stock
R7274 4 Pin Decoder Description The 4-pin decoder, previously only available as a spare (X9659), is compatible with the 0-4-0 W4 Peckett from the 2020 range.
Hornby R8107 TTS Sound Decoder - A4 Class Hornby R8107 TTS Sound Decoder - A4 Class
£50.99
In stock
R8109 TTS Sound Decoder - A4 Class Description IMPORTANT - The decoder does not support sound under DC (analogue) operation. Sounds can only be played under DCC (digital) operation. This applies to all sounds, both running and spot sounds. The locomotive's motor may be controlled under DC operation. Function list F0 Headlight/rearlight F1 Background steam/steam exhaust/coasting F2 Chime whistle F3…
Hornby R8108 TTS Sound Decoder - Class A1 Hornby R8108 TTS Sound Decoder - Class A1
£46.25
In stock
R8108 TTS Sound Decoder - Class A1 Product Info IMPORTANT - The decoder does not support sound under DC (analogue) operation. Sounds can only be played under DCC (digital) operation. This applies to all sounds, both running and spot sounds. The locomotive's motor may be controlled under DC operation. - Supports short and long decoder addresses - Adjustable acceleration and deceleration - Back EMF…
Hornby R8115 TTS Sound Decoder: Merchant Navy Hornby R8115 TTS Sound Decoder: Merchant Navy
£50.99
In stock
R8115 TTS Sound Decoder: Merchant Navy Description IMPORTANT - The decoder does not support sound under DC (analogue) operation. Sounds can only be played under DCC (digital) operation. This applies to all sounds, both running and spot sounds. The locomotive's motor may be controlled under DC operation. Function list F0 Headlight/rearlight F1 Steam/ Steam exhaust F2 Whistle long F3 Whistle medium…
Hornby R8245 Decoder Hornby R8245 Decoder
£41.99
In stock
R8245 Hornby Sapphire Locomotive Decoder Supports 1 Amp continuous current with 1.5 Amp stall. Low speed "gear" for shunting operations. Set amounts of "water" and "fuel" can be stored in the Sapphire providing real time fuel consumption. Burn rates can be selected. All CVs can be changed. The Sapphire Decoder is NMRA compliant, and supports RailCom and asymmetric DCC. High Frequency back-emf moto…
Hornby R8249 DCC Decoder 4 Function Hornby R8249 DCC Decoder 4 Function
£26.75
In stock
R8249 Hornby 4 Function Locomotive Decoder (v1.3 NMRA Compliant) The Hornby locomotive decoders may be used with all standard digital control equipment that conforms to the NMRA standards. Control of the motor's rotational speed (load compensation) Acceleration and deceleration separately adjustable Selectable for operation with 14, 28, 128 speed steps Programming on main track Four On/Off functio…

Hello,

We are very sorry, but the browser you are visting us with is outdated and not complient with our website security.

Please upgrade your browser to a modern secure version to view our website.