10ch 2.4GHz Radio Link with S Bus Telemetry

Code: AD0764
  • Out of stock
For all stock enquiries relating to this product please enter your email address below:

Radio Link AT9S 10 Channel 2.4GHz Set with Telemetry


10 Channel Fully Programmable Computer Transmitter.

DSSS and FHSS Working simultaneously.

SBUS, PPM and PWM. Compatible will all the latest systems.

Quality Ball-Raced Gimbles

Ergonomic Modern Design.

USB port for Upgrades and Data Back-up.

Full On-Screen Telemetry (GPS Features enabled when used in Conjunction APM or Pixhawk etc.).

Quick & Simple Operation thanks to Ergonomic Design.

Multiple Vibrating Safety Alarms.

Helicopter Mode with all 120 and 90 degree swash types and mixes.

Fixed Wing Mode with all the popular wing mixes etc.

Glider Mode with all popular wing and tail servo mixes.

Multi-Rotor Mode includes special drone features for multiple flight modes etc.

User Programmable Mixes.

Universal Battery Support - Use Lipo/Life/Nimh or AA Alkaline cells. (Voltage alarm adjustable in settings)

Anti-Short Battery Connection - Standard JST battery fitting with reverse polarity protection.

High Efficiency Allows over 3 hour run time from a 1800mAh 3S Lipo.

Three 3-Way Switches

Five 2-Way Switches

Two Linear Knobs

Two Linear Sliders

Lightening Fast Response - 3mS for all 9 Channels in Parallel.

15 Model Memory Storage with USB back-Up for extra.


Size: (TX) 183mm x 100mm x 193mm (Rx) 41mm x 23mm x 14mm

Weight: 0.88Kg

Frequency: 2.4Ghz

Modulation Mode: QPSK

Resolution: 4096

Channel Bandwidth: 5.0Mhz & 250Kbps

Spread Spectrum: FHSS & DSSS

Adjacent Channel Rejection: >38dbm

Operating Current: 90mA @ 12V

Operating Voltage: 7.4 to 18V

Channels: 10

Model Modes: Helicopter, Multirotor (Drone), Fixed Wing, Glider, Car and Boat

Simulator Mode: Tx runs in low power mode for long run times.

LCD Display: Full Colour 2.8 Inch, 240x320px

Whats in the Box?

The Latest RadioLink AT9S 10 Channel Transmitter

RadioLink R9DS 10Ch Telemetry Enabled S.BUS Receiver

RadioLink Transmitter Strap

Throttle Stick Hardware (To enable spring Centering of Throttle Stick)