Dynam P-51D Mustang 1200 mm w/retracts (No R/C, Lipo or Charger)

Code: AD0945
  • In stock

DYN8939V2 Dynam P-51D Mustang 1200 w/retracts w/o TX,RX, Battery ARTF

This is the new and improved version (V2) of the Dynam P-51D Mustang and it stands ready to show her supremacy and is virtually ready for those Axis bandits! This new version now includes a Tomcat Skylord 30 Amp ESC with a XT60 connector, pre-installed flaps, pre-installed flap servos, LED lights with pre-soldered connector ends and LED light controller for static and flashing operations. All you need is a 5 channel radio, 5 channel receiver and 3S 11.1V 2200 mAh Li-Po battery and you're ready take to the skies!

The flight times of this Dynam Mustang are a bit longer than average. While power is not massive there is plenty of power for scale loops, rolls, and immelmann turns.

Dynam P-51D Mustang V2 Features:

Tomcat Skylord 30 Amp ESC with XT60 connector

LED navigation lighting with LED control board (no more bare leads)

Flaps and flap servos are now pre-installed and fully operational

Electronic retractable main landing gear for scale appearance and more aerodynamic flight

Realistic scale features including WWII US Army scheme, hand painted pilot figure, gun turrets, and molded panel lines

Powerful BM3715A-KV890 Brushless Outrunner motor

Scale 3-blade propeller

Spec Check:

Wingspan: 1200mm / 47in

Overall Length: 1045mm / 41in

Flying Weight: 1100g

Motor Size: BM3715A-KV890 Brushless Outrunner Motor

ESC: 30A Brushless with XT60 connector

Servo: 4x 9g standard

Radio: 5 Channel (required)

CG (centre of gravity): 70 - 75mm from the leading edge at the wing root

Prop Size: 3-Blade Scale Prop

Recommended Battery: 3S 11.1V 2200mAh 20C LiPo with XT60 connector (required)

Approx. Flying Duration: Unknown

Minimum Age Recommendation: 14+

Experience Level: Intermediate

Recommended Environment: Outdoor

Assembly Time: 2 Hours

Material: Durable EPO

Please Note: This is sold in ARTF (Almost-ready-to-fly) format and requires Radio System, 2200mAh 3S Li-Po Battery with XT60, Charger and AA batteries.