Etronix DC Balance Charger Discharger & Cycler

Code: BA0147
  • In stock

ET0205 Etronix PowerPal DC Balance Charger-Discharger & Cycler

Etronix adds a new DC Power Pal to their line up. Small and compact this 12v DC features, microprocessor controlled high performance charger/discharger/cycler for NiCd/NiMH/Lithium/Pb batteries with an integrated cell voltage balancer.

Input 12v DC, temperature sensor option and integrated Lithium battery balancer.

Charge current up to 5A, discharge current up to 1A, 1 to 6 series of Lilo/LiPo/LiFe, 1 to 15 cells of NiCd/NiMH, 2 to 20v of Lead-acid (Pb)


Battery Type: 1-6 Li-Po, Li-Ion, Li-Fe, 1-15 NiCd/NiMH, 1-6 Lead-Acid

Charge Rate: 0.1A-5.0A (Max 50W)

Discharge Rate: 0.1A-1A (Max 5W)

Cycle: Charge/Discharge 1-5 Cycles

(charge>discharge, discharge>charge)

Balancer: Built-in individual voltage balancer for Lithium batteries 300mAh/cell current drain

Fast/Storage Mode Charge Lithium batteries for special purposes.

‘Fast' reduces Charge time, while ‘Storage' controls final voltage for long time storage

Charge Safety: Delta Peak Sensitivity voltage detection (NiCd/NiMH), Auto-Charge current limit useful for small capacity NiMH, Capacity limit charge, Temp limit charge (option), Time limit charge

Battery Data 5 model memory


Charge leads for Receiver batteries

Charge leads for Receiver batteries JST plug

Glow stick

Deans connector

Crocodile Universal clip

JST XH Balance Board