Scalextric C7005 Retro-Fit Digital Chip A - Single Seater Type The in-car microprocessor module allows the conversion of a standard Scalextric car to work on Scalextric Digital layouts. C7005 Chip A is designed to fit most F1 style cars. Some F1 cars chassis produced between 2004 and 20076 have mounting points for this specific chip. C7006 Chip B is designed to fit most saloon style cars. Some sal…

Scalextric C7017 Single Lane Curve The single lane half-straight can be used in conjunction with C7014 and C7015 Pit lane sections to build exciting track features. Use with C7016 Single Lane Half Straight to design single lane rally stages or pit roads, etc. This sections is compatible with both Digital and standard Scalextric layouts. Contents 4 x Single Lane Radius 3 Curve 22.5 degree Shown wit…

Scalextric C7019 Single lane Curve outer borders/barriers 22.5 deg x 4 For use with C7017 Single Lane Radius 3 Curve 22.5° x 4 Contents 4 x Single Lane Radius 3 Curve 22.5 degree Outer Borders x 4

Scalextric C8072 Guide Pivot Pack Pack of 1 guide blades with new braid carrier with braids Fits Wild 360 Porsche etc

Scalextric C8077 Grain of Wheat bulbs x 2 (clear) Fits various cars

Scalextric C8098 Front & Rear Axle Assemblies for Subaru Imprezza

Scalextric C8146 Motor Pack with 2 pinions Contents 1 x 18,000 rpm SP Motor Pack 2 x 9-tooth pinions For use with any Scalextric car fitted with an SP Motor - see car Service Sheet for details. Battery Requirements: None Safety Notice: Not suitable for children under 14 years. Made in China. Please retain these details for future reference.

Scalextrix C8201  Radius 1 Hairpin Curve 90 degrees Pack contains 2 pieces

Scalextric C8204 Radius 3 Curve 22.5 degree x2 (C153) 1:32 Scale Accessory Push-fit Scalextric track for quick and easy circuit building. Connect modern Scalextric track to original track (which has ring-shaped connectors) using the C8222 Converter Straight. Box Contains 2 x radius 3 curve 22.5 degrees

C8205 Standard Straight 350mm x 2 2 x 350mm Standard Straight Push-fit Scalextric track for quick and easy circuit building. Connect modern Scalextric track to original track (which has ring-shaped connectors) using the C8222 Converter Straight. Shown with C8233 Lead In and Lead Out Borders (not included).

Scalextric C8207 Half Straight  175 mm

Scalextric C8234 Radius 2 Curve 22.5 degree x 2 Push-fit Scalextric track for quick and easy circuit building. Connect modern Scalextric track to original track (which has ring-shaped connectors) using the C8222 Converter Straight. Shown with C8280 Radius 2 Inner Borders 22.5° and C8239 Radius 2 Outer Borders 22.5° (not included).

Scalextric C8238 Radius 4 Curve Outer Borders 22.5 degree x 4. Shown with C8282 Radius 4 Inner Borders 22.5° and C8235 Radius 4 Curve 22.5° (not included).

Scalextric C8247 Throttle Extension cables x 2 This pack contains two, 2 metre cables which allow you to extend the length of your hand controller cables. Enjoy driving from any position around your track. These extension cables are suitable for use with power bases C8217 and C8241. The plugs are stereo 3.5mm jack plugs which feature automatic automatic braking. This is now a standard feature on S…

Scalextric C8281 Radius 3 Curve Inner Borders 22.5 degree x 4. Shown with C8204 Radius 3 Curve 22.5° and C8224 Radius 3 Curve Outer Borders 22.5° (not included).

Scalextric C8282 Radius 4 Curve Inner Borders 22.5 degree x 4. Shown with C8235 Radius 4 Curve 22.5° and C8238 Radius 4 Outer Borders 22.5° (not included).

Scalextric C8300 Motor Bike guide blade x 1

Scalextric C8329 Guide Blade/4 braid plates

Scalextric C8416 Rear Tyres Rally

Scalextric Track Extension Pack 3 'One size fits all' concept - Compatible with Digital and Standard sets - Fits any sized layout Extending your Scalextric layout has never been easier. The seven Scalextric Track Extension Packs are totally flexible in their design. Any of these packs can be added to Standard or Digital Scalextric circuits. Each pack can be incorporated into a Scalextric circuit,…

C8554 Scalextric Track Extension pack No 5 Extending your Scalextric layout has never been easier. The seven Scalextric Track Extension Packs are totally flexible in their design. Any of these packs can be added to Standard or Digital Scalextric circuits. Each pack can be incorporated into a Scalextric circuit, from simple ovals and figure-of-eight tracks to the largest layouts. One or more Track…

Scalextric W10093 (C3143) MGB Motor

Scalextric C3738 Ford Sierra RS500 Steve Soper No 5 Race: BTCC 1988 Brands Hatch Driver: Steve Soper Steve Soper finished 2nd at Brands Hatch in the 1988 British Touring Car Championship (BTCC), behind rival Andy Rouse. Overall Steve finished 15th due to a combination of entering less than half of the races that year, with one being cancelled (where he had pole position). Of those races he entered…

Scalextric C3928 Ford XY Falcon GTHO 1971 Bathurst Winner Allan Moffat The Class E Ford XY GTHO of Allan Moffat is one of the all-time greats of Bathurst. 1971 saw Moffatt put the car on pole for the Hardie-Ferodo 500 and win the race by a lap from his nearest rival. Whilst a ‘boxy’ looking car, the GTHO was a fearsome competitor, combining great straight-line speed with pinpoint handling. Number:…