Balsa/Foam Models

BSI FOAM-CURE™ Silicone Based Adhesive For Foam Models FOAM-CURE™ is a silicone based adhesive that works very well on EPP and EPO foams. It is crystal clear and cures to a more flexible consistency than CA. It is, however, not instant bonding like CA and there is no accelerator to speed it’s curing. To obtain a faster initial bond when bonding two pieces, FOAM-CURE™ can be applied to one piece an…

Model Lite Lightweight Filler  (white) DM64 Strong lightweight filler which sands easily. Use only where a strong joint is not required. Use for grain filling by applying with plastic sponge. Bonds wood, foam, fibreglass. White or balsa tint for use in aeromodelling under clear covering film. Ideal for enhancing model rail scenic layouts eg creating ploughed fields. 250ml pack.

Humbrol Balsa Cement 24ml Please note that this item can only be delivered to UK addresses Usage: A quick drying transparent cement for balsa, other soft woods and cork. Substrate: Balsa, other soft woods and cork. Coverage: Depends on thickness of application. Application: Directly on to substrate. Drying time: 20-30 minutes. Fully dry in 1 hour. Drying times will vary according to ambient temper…

UHU Hart Tube 35 g UHU hart is a crystal-clear, fast drying adhesive for assembling small parts in model building, for handicraft work and for household tasks. Particularly suitable for balsa wood and other wooden materials. UHU hart is also suitable for stiffening and sealing the surface of materials. Dries hard. Glues balsa wood, wood based materials, metal and many types of plastic. For model b…

UHU POR 40g tube UHU por is a quick-setting special adhesive for bonding expanded polysterene, e.g. Styropor® also in combination with other materials. It forms an elastic adhesive film which is highly resistant to age, colorless and waterproof. Container Content Glue expanded Styrofoam® also in combination with other materials, e.g. wood, paper, metal, ceramic, plaster, fabric and various plastic…