28ml/125ml Bottles CANNOT POST - COLLECTION ONLY

Usage: A water-based solution for softening decals and securing them into position. Substrate Decals are usually applied onto painted surfaces. Care should be taken to avoid ‘silvering’ over matt paints. Application Brush on to decals or immerse them in Decal fix for approx. 45 seconds or until softened. Slide off using a brush and dab dry with tissue paper. Drying Time 20-30 minutes. Do not force…

Enamel Thinners - 28ml Bottle Usage: Thinning down of solvent-based enamel paints, most commonly for airbrushing Application As for the paint being used Drying Time Paint drying times may vary with the addition of Enamel Thinners

Modelcote Gloss Cote - 28ml Bottle Usage: A solvent-based varnish that goes on clear and dries clear, overcoming the yellowing effect associated with traditional varnishes. The product dries to a smooth, high-sheen gloss finish. Substrate Common plastics used to manufacture model kits including polystyrene and ABS, as well as MDF. Satin cote is usually applied as the final coat to a fully painted…

Liquid Poly - 28ml Bottle Usage: A solvent-based cement suitable for plastic model kits only. The product is a low viscosity version of Humbrol Poly Cement to enable application by brush. Substrate Common plastics used to manufacture model kits including polystyrene and ABS. The product works by melting the plastic on application and 'welding' two glued pieces of plastic together to form a strong…

Maskol - 28ml Bottle Usage: A rubber solution that can be applied to surfaces to prevent them from being painted. When the paint has dried the Maskol can simply be peeled off. Substrate Common plastics used to manufacture model kits including polystyrene and ABS and a wide variety of other applications including glass. Application Brush only. Apply to surface, allow to dry and paint over. When pai…

Modelcote Matt Cote - 28ml Bottle Usage: A solvent-based varnish that goes on clear and dries clear, overcoming the yellowing effect associated with traditional varnishes. The product dries to a smooth, low-sheen matt finish. Substrate Common plastics used to manufacture model kits including polystyrene and ABS, as well as MDF. Satin cote is usually applied as the final coat to a fully painted and…

Modelcote Satin Cote - 28ml Bottle Usage: A solvent-based varnish that goes on clear and dries clear, overcoming the yellowing effect associated with traditional varnishes. The product dries to a smooth, mid-sheen satin/eggshell finish. Substrate Common plastics used to manufacture model kits including polystyrene and ABS, as well as MDF. Satin cote is usually applied as the final coat to a fully…