Linkages

Composite Control Arm No 1 (4 pcs) JPDAC00001 Control arm ball fixing point x3 - 1.5mm diameter

8" M2 Threaded Control Rod (Pushrod) (10)

F-RCA137 M2 Ball Joint with Screw + Nut (2). Glass filled nylon body for extra trength supplied complete with brass ball drilled to suit M2 x 12mm. Steel bolt and nut supplied. Hole for Pushrod: M2 Length: 23mm Ball Diameter: 4.7mm Hole Diameter: 2.05mm Supplied Screw Length: 12mm Supplied Screw Diameter: M2. Pack of 2.

F-RCA121 M2 Metal Clevis w/200mm M2 Rod (pk 2)

F-RCA276  Closed Loop System - Heavy Duty (15kg)

Composite Control Arm No 3 (4 pcs) Control arm ball fixing point x3 - 1.5mm diameter

Composite Control Arm No. 4 (4 pcs) JPDAC0005 Control arm ball fixing point - 1.5mm diameter

Dubro  3108 Push Rod Seals flexible and waterproof seals are quick & easy to install Seal can be removed by simply removing O-ring

Du-Bro 167 90 degree Bellcrank Assembly 2 pieces per pack

Dubro 201 Rigging Couplers 2-56 Thread for cable controls & flying wires

Dubro 215 V-Tail Mixer for V-Tail Airplane and for Flaperons

DB517 2-56 Pull-Pull System Dubro makes 2 pull-pull or closed loop control systems (2-56 and 4-40) for rudder, elevator, tail wheels, etc., to provide you with the ultimate in control for situations where you need the lightest and most direct control run available. Each kit comes with 15 feet of nylon-coated cable, all mounting hardware and connectors.

Dubro 518 4-40 Pull-Pull System Key Features 22 piece set 60 lb Line Product Description Dubro makes 2 pull-pull or closed loop control systems (2-56 and 4-40) for rudder, elevator, tail wheels, etc., to provide you with the ultimate in control for situations where you need the lightest and most direct control run available. Each kit comes with 15 feet of nylon-coated cable, all mounting hardware…

Dubro 181 2-56 Threaded Ball Link Fits perfectly into throttle arms, nylon horns and servo holes.

EFLA203 Micro Control Connectors (2)

M2 Ball Joint With Screw & Nut (2)

Mini Ball Joint (pk 2) F-RCA140 Mini Ball link connector/ball/nuts Using clear nylon body for M2 rods, brass stand-off ball with M2 thread, complete with nut.

F-LA390/M2 Nylon Link for M2 (pack of 4) Control link made in nylon for use with F-LA370/M2 or F-LA380/M2, or for fitting to M2 rods etc. Length approximately 25mm.

M2 Threaded rod (whole length) 200mm stainless steel pk of 2 F-RCA302

5508048 M3 Ball Joint  (2 pcs) Ball hole size - 2mm

F-RCA123M3 M3 Extender Adaptor (pk 4)

F-LA400/M3 Steel Stud M3 x 45 mm pack of 4

M3 Threaded Rod (whole length) 200mm Pak 2 Stainless Steel F-RCA303

Mini Snap Link  F-RCA12 (pk 4) For connecting push-rods to control horns, servos and rudders etc. Combines with 2mm threaded rod F-LA380/M2 and with metal extenders F-LA370/M2 to make them adjustable. Length: 21mm.