Track

Gaugemaster GM17 N Gauge Connecting Wires (Wire>soldered Joiner) These N Gauge leads have fish plates at one end stripped and bare wire tinned on the other, wire colours are Black and Orange and measure 1m in length. The fish plates are compatable with Peco code 80 and code 55, Fleischmann N gauge track and Atlas N Gauge track. The wire used on this product is the same as the GM11 wire which measu…

Gaugemaster GM18 N Gauge Track Joiner (Fishplates) Scale / Type: N Scale Nickel silver fish plates for connecting all major brands of track. Compatable with Peco code 80 and code 55, Fleischmann N gauge and Atlas N gauge track

Gaugemaster GM58 N Buffer Stop Lights (Pack of 2) Two Red LEDs attached to a thin PCB stem with contacts on the two legs for power. These lights can be placed at the ends of sidings in stations or goods yards. In analogue mode the LEDs are set up so as you drive towards them the top LED shines and when you drive away from them the bottom LED shines. With DCC both LEDs are on at the same time.

GM57 N Buffer stop with light The pack contains one N scale Buffer Stop and Light, which is ready to be situated on any section of track. No construction is required to install this item on to your railway. The Light is simply clipped on to the track - no wires are required, but the Buffer Stop needs to be glued to the sleepers on the outside of the rails, ideal for platform ends or at the end of…

GM47 Gaugemaster N Scale Locomotive Wheel Cleaner This wheel cleaner features two incredible sponge strips which polish locomotive wheels and avoid scratching or possibly damaging traction tyres. The conductive sponge strips pass power to all pickups to gently clean the rotating wheels. Power is obtained by two pre-wired crocodile clips which can be clipped directly to the track, this means you ca…

Peco PL-41 Rail Cleaner Abrasive rubber block for removing dirt and oxidisation from the rail surface. Improves running, particularly at low speeds For use with Peco Streamline and Peco Setrack .

Peco SL-300 Nickel Silver Code 80 Wooden Sleepered N gauge Flexitrack (Single Piece)

Peco SL-300F (1) Nickel Silver Code 55 Wooden Sleepered Flexitrack (Single Piece)

Peco SL-302 Concrete Sleeper Type  Nickel Silver Track N gauge Code 80

Peco SL-302F Nickel Silver Code 55 Concrete Sleepered N Scale (Finescale) Flexitrack (Single Piece)

Peco SL-308F Code 80 (Finescale) Wooden Sleepers N Gauge Additional sleepers, 24 wooden.

Peco SL-310 Nickel Silver Rail Joiners (24) N/OO-9 Gauge Suitable for Code 80 and 55 Code 80 for mechanical and electrical bonding.

Peco SL-311 Insulated Rail Joiners (12) N/OO-9 Scale Suitable for both Code 80 and 55 moulded in nylon

SL-337 Re-Railer

Peco SL-340 Rail Type Buffer Stop N Gauge

Peco SL384 Code 80 Insulfrog Right Hand Catch Point N Gauge

Peco SL-387 Code 80 Insulfrog Left Hand Curved Point N Gauge Curved double radius turnout. L/H Insulfrog.Nominal radii: Outside 914mm, Inside 457mm. Length:157mm, Angle: 10 degrees.

Peco SL-394 Long Crossing Code 80 Insulfrog N Gauge Long Crossing. Insulfrog. Length: 187mm Angle: 8 degrees.

Peco SL-394F Code 55 (Finescale) Insulfrog Long Crossing N Gauge

Peco SL-404X - OO9 Scale 009/H0e Mainline Flexible Track

Peco ST-1  Standard Straight Setrack N gauge compatible with Peco Streamline

Peco ST-12  No.1 Radius Double Curve Setrack N gauge Compatible with Peco Streamline Double curve No.1 radius 228mm. 45 degree angle, 8 per circle.

Peco ST-14 No.2 Radius Standard Curve Setrack N gauge Compatible with Peco Streamline Standard curve No.2 radius 263.5mm. 22.5 degree angle,16 per circle.

Peco ST-15 No. 2 Radius Double Curve Setrack N Gauge Compatible with Peco Streamline Double curve No.2 radius 263.5mm. 45 degree angle,8 per circle.